Milwaukee M12 FUEL Stubby 1/2 Inch Impact Wrench (Bare Tool)
$249.00
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Up to 550 ft-lbs of Nut-Busting Torque
- Lightest Weight & More Compact
- 50% Faster Application Speeds
- Mode 1 RPM: 0-930; Mode 2 RPM: 0-2,100; Mode 3 RPM: 0-3,000; Mode 4 RPM: 0-1,300
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque.
- New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack
- Compatible with all M12™ batteries & Chargers
- Friction ring socket retention system: Reduces downtime on applications involving frequent changing of accessories
- Single handed mode changes for increased productivity
- Mode 1 IPM: 0 – 1,500; Mode 2 IPM: 0 – 3,000; Mode 3 IPM: 0 – 3,300; Mode 4 IPM: 0 – 3,300
Milwaukee M12 FUEL Stubby 1/2 Inch Impact Wrench (Bare Tool)
The new MILWAUKEE® 1/2” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. Leveraging POWERSTATE™ Brushless Motor, The Stubby Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This Milwaukee® solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can’t fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bosch 12V Max EC Flexiclick 5 In 1 Drill/Driver System Kit Factory Reconditioned
- Discover the Bosch 12V Max Impact Driver featuring compact design, powerful torque, and cordless convenience for professional and DIY fastening tasks.
Features
- Flexiclick® 5-in-1 design – delivers outstanding versatility in a compact, high-quality drill/driver
- Keyless chuck attachment – provides locked-in drilling for difficult materials
- Locking bit holder attachment – locks hex bits for high-torque driving
- EC Brushless motor – delivers longer runtime with 300 In.-Lbs. of torque and a max speed of 1,750 rpm
- Right-angle attachment – designed for tight work spaces; works with other three adapters and rotates to 16 positions without removing from tool
- Offset-angle attachment – offers precise screwdriving very close to edges; rotates to 16 positions without removing from tool
- Magnetic bit holder – provides the shortest head length for basic driving without an attachment
- Bosch 12V Max EC Brushless Flexiclick 5 In 1 Drill/Driver System Kit Factory Reconditioned
- Compact design – weighs only 1.2 Lbs. (tool only, not including battery) with a very short head length
- Two-speed transmission – provides a high-power setting at 0-460 rpm and a high-speed setting at 1,750 rpm
DEWALT 20V MAX Brushless 3 Tool Combo Kit
Features
- DCD777: 1/2-in Drill/Driver is only 7.52-in front to back and has a compact design to fit into tight spaces
- DCF787: 1/4-in impact driver is lightweight at only 2-lbs
- DCS356: Dual-Grip variable speed trigger gives users increased speed and application control
- DCS356 has a bright LED to illuminate dark work surfaces
DEWALT 20V MAX XR 2-Tool Combo Kit with POWERPACK Batteries
Features
- DCD806: Our Most Powerful 20V MAX* 2-Speed Hammer Drill** - Complete a wide range of applications with this hammer drill that is up to 109% more powerful†.
- DCF845: Complete tough fastening applications on the jobsite with 30% more torque**
- DCD806: Professional Performance - Complete jobs with top level speed, control, and precision with a high-speed transmission and variable speed trigger featuring 2 settings (no load 0-650/0-2,000 rpm).
- DCF845: Brushless motor delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws
Makita 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Makita-built brushless motor delivers 3,600 Max RPM and 1,590 in.lbs. of Max Torque
- Rear handle positioned 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- L.E.D. light ring provides superior 360° illumination helps eliminate shadows and illuminate a larger area
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins
Milwaukee M18 FUEL 1/4inch Hex Impact Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- POWERSTATE™ Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Tri-LED Lighting for maximum workspace visibility
- Compact Size (4.47") for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- 3900 RPM
- Single Handed Bit Insertion for Ease of Use
- 2.2lbs
- All-metal belt clip for portability
- Compatible with all M18™ batteries & chargers
- Most Powerful
Milwaukee M18 FUEL 1/4inch Hex Impact Driver Kit
- POWERSTATE™ Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Tri-LED Lighting for maximum workspace visibility
- Compact Size (4.47") for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- 3900 RPM
- Single Handed Bit Insertion for Ease of Use
- 3.8lbs (with battery)
- All-metal belt clip for portability
- Compatible with all M18™ batteries & chargers
- Most Powerful
Milwaukee MX FUEL Handheld Core Drill Kit with Stand
Features
- Safer handheld coringThe power to core 6 in. holes in reinforced concrete
- Fully compatible with the MX FUEL™ equipment system
- Patented clutch design
- AUTOSTOP™ technology
- Low speed: 790 RPM/ high speed: 1550 RPM
- Push button activation
- Onboard LED level
- Onboard LED performance gauge
- Wet/dry coring
- ONE-KEY™ compatible
- 2 Year warranty
Reviews
There are no reviews yet.