Bosch 10in Jobsite Table Saw with Gravity-Rise Wheeled Stand
Features
- 15-Amp saw with 3,800 rpm for rip-cutting and cross-cutting of fine and hard wood materials
- Convenience brake – helps blade stop in approximately three seconds, increasing productivity
- Clampzone™ areas – allow tabletop to be used as a light-duty, secondary work surface
- Open frame design – equipped with open frame roll bar and lightweight construction for durability
- Soft-start circuitry – manages intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
- Electronically regulated speed – helps maintain speed under load
- Portability – works seamlessly with the included lighter GTA50W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
- Rack and pinion rip fence – features color-coded index pins that correlate with matching color-coded scale for easy adjustments by hand dial
- Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
- On-tool storage – stores the rip fence, miter gauge, Smart Guard System, hex wrench, blade wrench and push stick on the tool
Bosch 12 Inch Dual-Bevel Glide Miter Saw
Features
- Bosch 12-inch Dual-Bevel Glide miter saw comes with blade, clamp and dust bag
- Powerful 15-Amp motor runs at 3,800 rpm
- Bosch Axial-Glid miter saw has a small footprint to save space
- Squarelock guard is pre-aligned for enhanced precision
- Ergonomic foam-coated grip allows for ambidextrous use
- Bosch GM12SD miters 60 degrees to the right and 52 degrees to the left
- Bevels 47 degrees in both directions
- Miter and bevel detents let you cut without measuring
- Scales are easy to read
- Dust collection catches 90 percent of all particles
Bosch Miter Saw Dual Bevel Glide 12in Reconditioned
Features
- Axial-Glide System durable precision – consistent precision over tool life; compact workspace – saves up-to 12 In. workspace; glide action – unmatched smoothness of cut
- Expanded cutting capacity: 14 In. horizontal capacity (nominal); 6-1/2 In. vertical capacity against the fence (base); 6-1/2 In. crown capacity against the fence (45° spring)
- Upfront bevel controls - all-metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw
- SquareLockquick-release fences: high-precision SquareLockfence aligns 90° to table and requires no adjustment; one touch lock/unlock to slide fence for added support
- Integrated expanding base extensions: 60% more left-to-right material support than leading competitor - 40 In. left to right
- Large easy-to-read uniform bevel and stainless steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
- Adjustable miter detents: detents at 0°, 15°, 31.6°, 22.5°, 45°, 60° right super-accurate and durable design
- Push-button miter Detent override - easy-to-access thumb actuated control right up front for fine miter angle adjustment
- Bevel detents: 0, 33.9°, 45° left/right for accurate cuts
- Category best 90% dust collection - optimized for cutting 2x material with a vacuum
Delta 5 HP UNISAW with 52 In. BIESEMEYER Fence System
Features
- BI-LEVEL DUST EXTRACTION™ system results in optimal dust collection
- Improved table-top geometry provides more surface area, providing stability, smoothness and superior ease
- 2-position, quick-change guard system for improved safety and functionality
- On-board storage
- Independently certified to applicable standards
- BIESEMEYER™ Fence System, with hairline pointer and built-in tape, allows precision set-ups
- Single-cast trunnion system provides increased accuracy
- SURE-LOCK™ dual front cranks allow easy, accurate, and repeatable blade-height and bevel adjustments
- Powered by 5 HP, 230 Volt, 1 phase, 60 Hz motor
- SURE-LOCK™ dual front cranks provide convenient access
DEWALT 10 Inch Jobsite Table Saw 32-1/2 Inch Rip Capacity and Rolling Stand with Circular Saw Blade Combo Kit Bundle
Features
- Includes saw, rolling stand and 10-in blade
- 15-amp motor generates 4,800-RPM to quickly rip through hardwoods with ease
- 10-in carbide-tipped blade is durable
- 32.5-in right rip capacity and 24-in left rip capacity easily accommodate larger shelving and trim material
- Fence flips over to allow for narrow rip cuts, and telescoping rails retract for portability
- Telescoping fence rails retract to create a small, portable package
- Flip over ripping fence allows for narrow rip cuts
- 10-in Jobsite Table Saw 32-1/2-in (82.5cm) Rip Capacity, and a Rolling Stand
- 2-1/2-in dust collection port easily connects to a vacuum for efficient dust extraction
- 3-1/8-in depth-of-cut at 90° and 2-1/4-in at 45°
DEWALT 10in Jobsite Table Saw 32 1/2in Rip Capacity & Rolling Stand
- Includes saw, rolling stand and 10-in blade
- 15-amp motor generates 4,800-RPM to quickly rip through hardwoods with ease
- 10-in carbide-tipped blade is durable
- 32.5-in right rip capacity and 24-in left rip capacity easily accommodate larger shelving and trim material
- Fence flips over to allow for narrow rip cuts, and telescoping rails retract for portability
- Telescoping fence rails retract to create a small, portable package
- Flip over ripping fence allows for narrow rip cuts
- 10-in Jobsite Table Saw 32-1/2-in (82.5cm) Rip Capacity, and a Rolling Stand
- 2-1/2-in dust collection port easily connects to a vacuum for efficient dust extraction
- 3-1/8-in depth-of-cut at 90° and 2-1/4-in at 45°
DEWALT 12 in Sliding Compound Miter Saw with Compact Miter Saw Stand
Features
- Powerful 15-amp, 3,800 RPM motor delivers extended power and durability
- Exclusive back fence design cuts up to 2 x 16 dimensional lumber at 90° and 2 x 12 at 45°
- Precise miter system and machined base support
- Miter 60° to the right and 50° to the left
- Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable, and compact saw
- Precise miter system and machined base fence support optimized durability and cutting accuracy
- Oversized bevel scale makes bevel angle adjustments accurate and easy
- Cam lock miter handle with detent override deliver quick and accurate miter angles
- Innovative gearbox and belt-drive design increases vertical cutting capacity
- Miter Saw Stand's compact design allows easy transport and storage
DEWALT 12 Inch 15 Amp Dual Bevel Compound Miter Saw & Saw Stand Bundle
Features
- Miter Saw: Stainless steel miter detent plate with 14-positive stops delivers repeatable accuracy and work site durability
- Miter Saw: Tall sliding fences support crown molding up to 6-5/8-ft nested and base molding up to 6-1/2-ft vertically against fence
- Miter Saw: Double-bevel design allows saw to bevel 0° - 48° to the left and right with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, and 45 degrees
- Miter Saw: 0 Degrees - 50 degrees left and right miter capacity
- Miter Saw: Cam lock miter handle with detent override delivers quick and accurate miter angles
- Miter Saw: 12in 15 Amp Dual Bevel Compound Miter Saw
- Saw Stand: Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
- Saw Stand: Leg lock levers allow for fast and easy set up
- Saw Stand: 40inch beam extends to support up to 10' of material and up to 500 lbs.
DEWALT 20V MAX 6-1/2 in. Brushless Cordless Circular Saw (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- POWERFUL AND EFFICIENT brushless motor provides optimal cutting performance in a variety of materials
- HIGH MANEUVERABILITY with its lightweight and compact design
- QUICKLY ADJUST the bevel capacity from 0 - 50° with the tool-free bevel lever
- CONVENIENT STORAGE on the jobsite with the built-in rafter hook
- ADDED SAFETY: Electric brake quickly stops the blade after the trigger is released
- INCREASED VISIBILITY and cut accuracy with bright LED
- MINIMIZE DUST WHILE CUTTING with the optional dust chute, compatible with the DEWALT® AirLock™ system or standard 35 mm dust extractor
- COMPATIBLE with all DEWALT 20V MAX and FLEXVOLT Batteries
DEWALT 60V MAX 6-1/2in Cordless TrackSaw Kit
Features
- Zero clearance TrackSaw cutting system delivers precise, straight, splinter-free cuts
- For use with TrackSaw dual-edged tracks for perfectly straight cuts in both directions
- On-track cut depth: 2/1/8"(54mm) at 90; 1-5/8" (41mm) at 45
- Brushless motor effortlessly Powers through hardwoods up to 2-1/8 In. thick
- Continuous anti kickback mechanism and riving knife prevent kick-back when engaged
- Straight plunge mechanism for optimal ergonomics
- Low-profile blade guard allows saw to be used in confined spaces
- Universal 1-1/4" dust port for 90% efficient dust collection with vacuum
DEWALT FLEXVOLT 60V MAX 7 1/4in Circular Saw with Brake (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90 Degree bevel
- Maximum bevel capacity of 57 Degree with bevel stops at 22.5 Degree and 45 Degree
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
- FLEXVOLT® 60V MAX* Brushless 7-1/4 in. Cordless Circular Saw with Brake (Tool Only)
- FLEXVOLT® 60V MAX* Brushless 7-1/4 in. Cordless Circular Saw with Brake (Tool Only)
DEWALT XR 20V Max Oscillating Multi Tool 33 Pieces Kit
Features
- Tackle demanding applications with a powerful motor that delivers up to 20,000 OPM no load
- The 3-Speed selector allows users to choose their speed setting based on application
- Dual-grip variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter for use with most oscillating tool accessory brands
- Quick-change accessory system helps users to quickly change hot blades without touching them
- Lock-on/off switch helps reduce user fatigue during prolonged applications when locked-on and allows for secure storage when locked-off
- Bright LED light helps illuminate low-light work surfaces for accurate cutting
- XR 33-Piece Cordless Brushless 20-volt Max Variable Speed Oscillating Multi-Tool Kit with Soft Case (1-Battery Included)
