Makita 40V max XGT Circular Saw Kit Rear Handle 7 1/4
$469.00
Features
- OUTPOWER: Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
- OUTSMART: Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- OUTLAST: XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- 2-9/16″ cutting depth allows cutting of 3X lumber in a single pass
- Electric brake for maximum productivity
- Bevel angle up to 53º, with positive stops at 22.5º and 45º
- Ergonomic design at only 11.7 lbs.; up to 1.5 lbs. lighter than corded models
- Increased maneuverability due to lightweight design and Magnesium diecast base
- Onboard offset wrench for fast and easy blade changes
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- 3-year limited warranty on tool, battery and charger
- Only use genuine Makita® Batteries and Chargers
Description
Makita 40V max XGT Circular Saw Kit Rear Handle 7 1/4
The Makita 40 Volt Max XGT® brushless circular saw kit is a perfect cordless solution for taking on high-demand applications. Tool features Makita built brushless motor, which delivers 6400 RPM for quick cutting performance than corded. This 7-1/4 Inch rear handle tool cuts 3X the material in a single pass with an extra-large cutting capacity of 2-9/16 Inch. It provides 56 deg bevel capacity with positive stops at 22.5 deg as well as 45 deg and a bevel up to 56 deg. Saw is packed with feature like a die-cast magnesium base and an electric brake for increased productivity. The Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. Circular saw is also equipped with Makita’s Extreme Protection Technology (XPT™) (XPT™), a series of integrated seals engineered to enhance tool operation in harsh conditions by channeling water and dust from key internal components. The XGT® is a system of equipment, tools, batteries and chargers that make use of 40 Volt max Lithium-Ion batteries. This XGT® is engineered to render high power to take on high-demand applications, while assuring complete transition to a cordless job site. The XGT® has advanced brushless motor engineering, intelligent digital communication and longer endurance features to outpower, outsmart and outlast the competition. This circular saw is perfect for framers, builders, roofers, forming and many more.
Reviews (0)
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DEWALT 20V MAX XR Brushless Cordless 1/2 Inch Hammer Drill Kit
Shop DEWALT 20V MAX XR Brushless tools for powerful performance, longer runtime, and durability. Explore drills, impact drivers, saws, and more.
Features
- 50% higher torque than a leading competitor - the industry's highest rated MAX torque cordless 1/2 in. Hammer drill makes large diameter holes in metal, wood, and concrete with 2,100 in-lbs. Of MAX torqueᵒ.
- Our most powerful 20V MAX* 1/2 in. Hammer drill†† - make large diameter holes in wood, metal, and concrete.
- Help maximize control - equipped with the anti-rotation system that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Minimize downtime - make up to 275 holes per charge and complete jobs quickly with a speed of application of only 2.6 seconds.
- Advanced maneuverability - access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill.
- 3-speed high-performance transmission - help optimize runtime and performance with an all metal transmission.
- Illuminate dim areas - brighten your workspace with the pivoting 3-position, push-button LED.
- Strong bit grip - get high bit-retention with the 1/2 in. Ratcheting nitro-carburized metal chuck with carbide inserts.
- Tool Connect Chip ready - track and manage in the Tool Connect system (chip sold separately).
- Simplify Asset Management - Track and manage with the TOOL CONNECT CHIP READY system (chip sold separately) and the Site Manger app.
Makita 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Makita-built brushless motor delivers 3,600 Max RPM and 1,590 in.lbs. of Max Torque
- Rear handle positioned 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- L.E.D. light ring provides superior 360° illumination helps eliminate shadows and illuminate a larger area
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins
Milwaukee M18 FUEL 1-3/4 Inch SDS MAX Rotary Hammer with ONE-KEY Kit
- Hardest hitting, fastest drilling
- Designed for maximum control
- Increased productivity, no cords
- POWERSTATE™ Brushless Motor generates the power to deliver 347 RPM & 2,625 BPM
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overload, overheating and over-discharge
- AUTOSTOP™ Enhanced Kickback Control prevents over rotation in a tool bind up
- AVS Anti-Vibration System minimizes vibration for maximum comfort
- VACLINK™ Wireless Dust Control: Ability to activate a compatible Dust Extractor directly from the tool, increasing efficiency on the jobsite
Milwaukee M18 FUEL 1/2inch Hammer Drill/Driver (Bare Tool)
Features
“Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Most Powerful Hammer Drill
- Only 6.9" in length for access into tight spaces and reduced fatigue
- Auto-Stop™ Control Mode, Enhanced Safety
- POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
- Fastest Drilling and Driving applications under load
- Auto-Stop Feature to Protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a protection event
- 1/2" all-metal chuck with carbide teeth for maximum durability, grip and bit retention
- Mechanical Clutch for consistency in driving a wide range of fasteners
- Unmatched Performance with the most runtime in class with the XC5.0Ah batteries
- Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
- All-metal belt clip for portability
- 1400 in-lbs of torque
- LED light for better visibility in low-light situations
Milwaukee M18 FUEL 1/4inch Hex Impact Driver Kit
- POWERSTATE™ Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Tri-LED Lighting for maximum workspace visibility
- Compact Size (4.47") for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- 3900 RPM
- Single Handed Bit Insertion for Ease of Use
- 3.8lbs (with battery)
- All-metal belt clip for portability
- Compatible with all M18™ batteries & chargers
- Most Powerful
Milwaukee M18 FUEL Hole Hawg 1/2 in. Right Angle Drill (Bare Tool)
- Bere Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Fastest Rough-Ins
- Lightest Right Angle Drill
- Up to 220 7/8" Holes Per Charge
- All Metal 1/2" Keyed Chuck
- POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 2-9/16" in. holes
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack delivers over 220 7/8" holes per charge, and has 50% More Power and Runs 50% Cooler vs. REDLITHIUM™ XC
- LED light to illuminate the work area
- Compatible with all M18™ batteries
- Ergonomic Top Handle for maximum comfort
Milwaukee M18 FUEL Mud Mixer with 180 Degree Handle (Bare Tool)
- Power to mix heavy compounds, such as concrete and mortar
- Ultimate speed control: 3 different ways of controlling speed for clean and consistent mixes (8-Speed setting dial, variable speed trigger and a lock on button)
- Up to 15 buckets per charge (5.0 Ah battery and 5 Gallon buckets)
- 180° Adjustable handle with 16 adjustable settings for user to optimize based on preference and comfort
Reviews
There are no reviews yet.