DEWALT 12 Inch 15 Amp Dual Bevel Compound Miter Saw & Saw Stand Bundle
$708.00
Features
- Miter Saw: Stainless steel miter detent plate with 14-positive stops delivers repeatable accuracy and work site durability
- Miter Saw: Tall sliding fences support crown molding up to 6-5/8-ft nested and base molding up to 6-1/2-ft vertically against fence
- Miter Saw: Double-bevel design allows saw to bevel 0° – 48° to the left and right with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, and 45 degrees
- Miter Saw: 0 Degrees – 50 degrees left and right miter capacity
- Miter Saw: Cam lock miter handle with detent override delivers quick and accurate miter angles
- Miter Saw: 12in 15 Amp Dual Bevel Compound Miter Saw
- Saw Stand: Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
- Saw Stand: Leg lock levers allow for fast and easy set up
- Saw Stand: 40inch beam extends to support up to 10′ of material and up to 500 lbs.
DEWALT 12 Inch 15 Amp Dual Bevel Compound Miter Saw & Saw Stand Bundle
The DeWALT 12 Inch double bevel compound miter saw with 15 Amp, 3800 RPM motor delivers extended power and durability. It has a stainless-steel miter detent plate with 14 positive stops and cam miter lock system for repeatable accuracy and durability with easy adjustments. Tall sliding fences of miter saw is designed to support 6-1/2 Inch of base molding vertically and 6-5/8 Inch of crown molding vertically nested. Cam lock miter handle with detent override delivers quick and precise miter angles. The high-efficiency dust duct is concentrated at the point of cut for maximum collection. Lightweight design and built-in carry handle facilitates for portability. Double-bevel design allows saw to bevel 0 to 48 degree to the left and right with positive stops at 0, 22.5, 33.9 and 45 degree. It assures 0 to 50 degree left and right miter capacity. This tool comes with a 12 Inch carbide tipped blade, wrench, vertical clamp and a dust bag. Also included is a DWX724 Compact Miter Saw Stand. The Compact Miter Saw Stand is lightweight and easy to move about for jobsite convenience. The aluminum frame is sturdy, taking up to 500 pounds in weight, and materials up to 10 feet in length. However, due to the construction, it only weighs 29.8 pounds, making it portable over any terrain. This compact miter saw stand has a 40-inch beam and folding legs, making it even easier to move around. Non-marring feet will not scratch the surface the DeWalt miter saw stand is placed on, and the supports or stops are easily repositionable to suit your needs. The tool mounting brackets are convenient on busy work sites.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DEWALT 20V MAX XR Brushless Cordless 1/2 Inch Hammer Drill Kit
Shop DEWALT 20V MAX XR Brushless tools for powerful performance, longer runtime, and durability. Explore drills, impact drivers, saws, and more.
Features
- 50% higher torque than a leading competitor - the industry's highest rated MAX torque cordless 1/2 in. Hammer drill makes large diameter holes in metal, wood, and concrete with 2,100 in-lbs. Of MAX torqueᵒ.
- Our most powerful 20V MAX* 1/2 in. Hammer drill†† - make large diameter holes in wood, metal, and concrete.
- Help maximize control - equipped with the anti-rotation system that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Minimize downtime - make up to 275 holes per charge and complete jobs quickly with a speed of application of only 2.6 seconds.
- Advanced maneuverability - access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill.
- 3-speed high-performance transmission - help optimize runtime and performance with an all metal transmission.
- Illuminate dim areas - brighten your workspace with the pivoting 3-position, push-button LED.
- Strong bit grip - get high bit-retention with the 1/2 in. Ratcheting nitro-carburized metal chuck with carbide inserts.
- Tool Connect Chip ready - track and manage in the Tool Connect system (chip sold separately).
- Simplify Asset Management - Track and manage with the TOOL CONNECT CHIP READY system (chip sold separately) and the Site Manger app.
DEWALT 60V MAX Mixer/Drill with E-Clutch System Kit
- Discover DEWALT Brushless 60V MAX tools built for powerful performance, long runtime, and professional-grade durability on demanding jobs.
- Integrated e-clutch system helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
- Continuous variable speed trigger allows the correct speed to be found.
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
Makita 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Makita-built brushless motor delivers 3,600 Max RPM and 1,590 in.lbs. of Max Torque
- Rear handle positioned 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- L.E.D. light ring provides superior 360° illumination helps eliminate shadows and illuminate a larger area
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins
Milwaukee M12 FUEL Installation Drill/Driver Kit
- 4-in-1 Dedicated solutions
- Unrivaled access and control
- Up to 300 in-lbs of max torque
- Offset attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening
- Right angle attachment provides efficient fastening and/or drilling at 90 degrees for unrivaled access in tight spaces
- All metal 3/8 in. chuck and 1/4 in. hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling & fastening applications
- Magnetic bit holder holds multiple bits on board to save time when switching accessories
- 5.12 in. wide and only 2.0 lbs with battery attached
- Inline grip allows for maximum tool control and easier access to hard to reach places
- Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface
- 1/4 in. hex, 3/8 in. chuck, and offset attachments connect to right angle attachment for added versatility when drilling and fastening at a right angle
- POWERSTATE™ Brushless motor delivers 300 in-lbs of max torque
- Attachments connect in 16 different positions for access at almost every angle
Milwaukee M18 FUEL 1 1/8inch SDS Plus Rotary Hammer with ONE KEY (Bare Tool)
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- POWERSTATE™ Brushless Motor delivers maximum power and long motor life
- REDLINK PLUS™ Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging.
- The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ XC battery packs
- 3.6 ft-lbs Impact Energy
- ONE-KEY™ technology allows for tracking, tool security, and inventory management
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
- 3 Mode: Rotary Hammer, Hammer Only, Rotary Only
- 800 RPM
- 4,600 BPM
- Part of the M18™ system, featuring over 200+ solutions
Milwaukee M18 FUEL Hole Hawg 1/2 in. Right Angle Drill (Bare Tool)
- Bere Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Fastest Rough-Ins
- Lightest Right Angle Drill
- Up to 220 7/8" Holes Per Charge
- All Metal 1/2" Keyed Chuck
- POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 2-9/16" in. holes
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack delivers over 220 7/8" holes per charge, and has 50% More Power and Runs 50% Cooler vs. REDLITHIUM™ XC
- LED light to illuminate the work area
- Compatible with all M18™ batteries
- Ergonomic Top Handle for maximum comfort
Milwaukee MX FUEL Handheld Core Drill Kit with Stand
Features
- Safer handheld coringThe power to core 6 in. holes in reinforced concrete
- Fully compatible with the MX FUEL™ equipment system
- Patented clutch design
- AUTOSTOP™ technology
- Low speed: 790 RPM/ high speed: 1550 RPM
- Push button activation
- Onboard LED level
- Onboard LED performance gauge
- Wet/dry coring
- ONE-KEY™ compatible
- 2 Year warranty
Reviews
There are no reviews yet.