Metaltech Scafflock Safety Brakes
Milwaukee M18 FUEL 1/2inch Hammer Drill/Driver (Bare Tool)
Features
“Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Most Powerful Hammer Drill
- Only 6.9" in length for access into tight spaces and reduced fatigue
- Auto-Stop™ Control Mode, Enhanced Safety
- POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
- Fastest Drilling and Driving applications under load
- Auto-Stop Feature to Protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a protection event
- 1/2" all-metal chuck with carbide teeth for maximum durability, grip and bit retention
- Mechanical Clutch for consistency in driving a wide range of fasteners
- Unmatched Performance with the most runtime in class with the XC5.0Ah batteries
- Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
- All-metal belt clip for portability
- 1400 in-lbs of torque
- LED light for better visibility in low-light situations
Milwaukee M12 FUEL Installation Drill/Driver Kit
- 4-in-1 Dedicated solutions
- Unrivaled access and control
- Up to 300 in-lbs of max torque
- Offset attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening
- Right angle attachment provides efficient fastening and/or drilling at 90 degrees for unrivaled access in tight spaces
- All metal 3/8 in. chuck and 1/4 in. hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling & fastening applications
- Magnetic bit holder holds multiple bits on board to save time when switching accessories
- 5.12 in. wide and only 2.0 lbs with battery attached
- Inline grip allows for maximum tool control and easier access to hard to reach places
- Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface
- 1/4 in. hex, 3/8 in. chuck, and offset attachments connect to right angle attachment for added versatility when drilling and fastening at a right angle
- POWERSTATE™ Brushless motor delivers 300 in-lbs of max torque
- Attachments connect in 16 different positions for access at almost every angle
Milwaukee M18 FUEL 3/8 Compact Impact Wrench with Friction Ring (Bare Tool)
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- 4.8" in length provides most access in tight spaces
- The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque.
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
- Mode 1 RPMs: 0-800; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
- Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to to 69kV environments
- Compatible with all M18™ batteries & Chargers
Milwaukee M12 FUEL 1/4 Inch Subcompact Impact Wrench with Friction Ring (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Best Underhood Access
- Up to 100 ft-lbs Nut Busting Torque
- Lightest Weight
- 50% Faster Application Speeds
- Mode 1 RPM: 0-1,500; Mode 2 RPM: 0-2,900; Mode 3 RPM: 0-3,800; Mode 4 RPM: FWD: 0-2,200, REV: 0-3,800 / 0-2,000
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Variable speed trigger for precise control
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 10 ft-lbs. of torque.
- Friction ring socket retention system: Reduces downtime on applications involving frequent changing of accessories
- Compatible with all M12™ batteries & Chargers
- Single-handed mode changes for increased productivity
- Mode 1 IPM: 0 – 1,350; Mode 2 IPM: 0 – 3,700; Mode 3 IPM: 0 - 4,400; Mode 4 IPM: 0 - 4,400
- Bare tool. Battery and charger sold separately.
Milwaukee M12 FUEL 3/8 Inch Subcompact Impact Wrench with Friction Ring (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Best Underhood Access
- Up to 225 ft-lbs of Nut-Busting Torque
- Lightest Weight
- 30% Faster Application Speeds
- Mode 1 RPM: 0-1,150; Mode 2 RPM: 0-2,400; Mode 3 RPM: 0-3,400; Mode 4 RPM: FWD: 0-1,600, REV: 0-3,400 / 0-1,500
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Variable speed trigger for precise control
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque.
- Friction ring socket retention system: Reduces downtime on applications involving frequent changing of accessories
- Compatible with all M12™ batteries & Chargers
- Single-handed mode changes for increased productivity
- Mode 1 IPM: 0 - 1,000; Mode 2 IPM: 0 - 3,400; Mode 3 IPM: 0 - 3,600; Mode 4 IPM: 0 - 3,600
- Bare tool. Battery and charger sold separately.
Bosch 18V Brushless 23 Gauge Pin Nailer (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Pneumatic-Like Cordless Power: Experience the consistent driving force of pneumatic tools without the hassle of compressors and hoses. The 18V brushless motor and optimized coil spring system reliably sink 23-gauge pin nails for flawless finish trim and wood veneer work.
- Precision & Workpiece Protection: Achieve clean, consistent pin nailing with a narrow nose and precise pin guiding. Dry-fire lockout prevents blank firing (stops at 4 nails), reduced recoil, and included no-mar contact tips safeguard your delicate workpieces from damage and unsightly dents.
- Enhanced Productivity & Efficiency: Eliminate downtime with quick, toolless depth adjustments and an onboard LED light that illuminates your work area for superior accuracy. The ergonomic, well-balanced design and low recoil significantly reduce user fatigue during extended use.
- Uninterrupted Workflow: Navigate tight spaces and hard-to-reach areas with ease thanks to the compact, cordless 18V design. The integrated heavy-duty belt hook (right or left mount) provides convenient portability and storage, keeping your tool always within reach.
- AMPShare™ System Compatibility: This pin nailer is part of the AMPShare™ System, ensuring compatibility with all Bosch 18V batteries and chargers, as well as a growing list of cordless products from other AMPShare™ brands, streamlining your tool management.
- Brushless motor – for efficient power to consistently sink 23 gauge pin nails into wood
- Non-marring contact tip – protects the workpiece from dents
- Optimized spring coil system – helps deliver reliable performance from start to finish
- Integrated belt hook – right or left side mount for easy portability and storage
- This product is a bare tool. Battery and charger are sold separately.
Werner LevelSafe Pro Automatic Leveler
Features
- Easily attach to select Werner ladders to level ladder on uneven surfaces
- Additional 8.5” maximum automatic leveling height on all ladders
- Compatible for use with Werner ladders 225 lb. Type II - 375 lb. Type IAA duty rating
- Compatible for use with the following Werner ladder models: D1200-2, D1300-2, D500-2, D5900-2, D6000-2, D6200-2, T6200-2GS, D7100-2, 7100-2
- The ladder’s duty rating will remain the same upon installation
- 90-degree rotation of handles engages/disengages Micro-Adjust feature
- ANSI tested. OSHA compliant for safety.
- Easily automatically levels and locks securely in place
- Two (2) ladder levelers (one per rail) comes with mounting hardware, template, and instructions. Note: during installation move the ladder shoes to the leveler legs.
- Width of ladder is increased by approximately 4”
Little Giant Safety Jumbo Step 4 Step 4-3/4 Ft 1AA 375 Lb FG-Brown Box Fiberglass Stepladder
Features
- Tool Tray Top Cap: Keep your tools close at hand. The integrated tool tray on the handrail allows you to place your phone, hammer, drill or other materials on the tray for easy access while working
- Rotating Safety Handrail: The Jumbo Step has a rotating safety handrail for added stability. This feature helps step stool users to feel more secure and confident while working at heights
- Large Platform Steps: With the Jumbo Step's ultra-wide steps, it feels like walking up a staircase, not a ladder. It is made from lightweight, aircraft grade aluminum and its steps feature a safe, non-slip surface
- Duty Rating: Type IAA - Special Duty
- Feet: Standard non-marring (riveted)
- Hinge Lock: Handle Lever (Safety Step)
- Spreader System: Hinge Spreader (Safety Step)
Milwaukee Metric & SAE Combination Wrench Set with PACKOUT Organizer 30 Piece
Shop Milwaukee Metric hand tools designed for accuracy, durability, and professional performance. Explore metric socket sets, wrenches, ratchets, and accessories built to handle demanding automotive and industrial applications.
Brand Name
Milwaukee
Assembled Weight (lbs)
9.40
Box Head Design
Rigid (Non-Flex)
California Proposition 65 Warning Required
No
Color Coded
Yes
Country of Origin
Taiwan
Deep Offset
No
Drop Forged
Yes
MFG Part # (OEM)
48-22-9485
Material
Chrome Vanadium Steel
Product Condition
New
Ratcheting
No
Unit of Measurement
Metric and Inch
UPC
045242824144
Warranty Type
Lifetime against Manufacturer's Defects
Weight (lbs)
19.86
Milwaukee PACKOUT 2-Wheel Cart
Werner 18 Ft. Reach Height Type IA Aluminum Multi-Position Ladder
Features
- Maximum reach of 18 ft in extension ladder position
- Up to 20 adjustable working heights or positions
- Easily converts into a twin stepladder, stairway stepladder, extension ladder or 2-scaffold bases
- Slip-resistant feet and extra-wide flared bottom provide additional support and prevent accidents
- Telescoping design offers maximum versatility and easy storage
- Double-riveted steps ensure long-lasting durability
- 300-lb duty rating ensures stability
- ANSI, OSHA and CSA certified for safety
- Designed for 1 or 2-person jobs
- Safe for one or two person jobs
