Makita 40V Max XGT Brushless Cordless 2-Piece 2.5Ah/4.0Ah Combo Kit
$499.00
Features
- Our most powerful Hammer Driver-Drill with Makita-built brushless motor delivers 1,590 in.lbs. of Max Torque
- 3-Speed Transmission provides optimal balance of torque and speed with 3 settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM)
- Electronic digital clutch accurately targets desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4 speed settings (0-1,200/ 0-2,100/ 0-3,000/ 0-3,900 RPM & 0-1,900/ 0-3,100/ 0-3,600/ 0-3,900 IPM) provides 2,040 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- BL4040F 4.0Ah High Power Battery features tabless cell technology delivering up to 35% more power* for optimal performance with GPH03
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- 40V max XGT® Lithium-Ion 4.0Ah High Power Battery reaches a full charge in 70 minutes or less
- The XGT® Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- The XGT® Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Only use genuine Makita® Batteries and Chargers
- 3-year limited warranty on tool, battery and charger
- *Compared to BL4040
Makita 40V Max XGT Brushless Cordless 2-Piece 2.5Ah/4.0Ah Combo Kit
The 40V max XGT® Brushless Two-Piece Combo Kit (GT202SU1D1) is a premium two-piece drilling and fastening combo kit. The Two-Piece Kit includes the 40V max XGT® 3-Speed 1/2″ Hammer Driver-Drill (GPH03Z) and the 40V max XGT® High Torque 4-Speed Impact Driver (GDT04Z). The Makita 40V max XGT® 3-Speed 1/2″ Hammer Driver-Drill (GPH03) is Makita’s most powerful Hammer Driver Drill, delivering 1,590 in.lbs. of max torque with a three-speed transmission. The GPH03 breaks new ground for the most demanding drilling and driving applications in wood, masonry, and metal. The hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry. The GPH03 features an electronic digital clutch that accurately targets the desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high). It features faster drilling speeds with 3 speed settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM). The 40V max XGT® 4-Speed Impact Driver (GDT04) gives the user compact fastening power while delivering up to 2,040 in.lbs. of max torque with 4 Speed Settings and Tightening Mode. The XGT® Impact Driver features a Makita-built brushless motor that delivers up to 2,040 in.lbs. of Max Torque, allowing it to outpower similar models in heavy load applications. It features digitally controlled modes for a wide variety of applications, including speed control and tightening modes to prevent sheet metal screw stripping. XGT® is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DEWALT 20V MAX Brushless Site Ready 7-Tool Combo Kit
Features
- DCD798: Over 1 in. shorter in length** at 6.93 in. (tool head length only) to tackle tough jobs
- DCF787: Variable speed trigger allows for control and precision on delicate work surfaces
- DCS565: Quickly adjust the bevel capacity from 0 - 50° with the tool-free bevel lever
- DCS382: 1-1/8 in. stroke length quickly cuts through a variety of materials
- DCS356: The 3-speed selector allows users to choose their speed setting based on application; Dual-Grip variable-speed trigger gives users ultimate speed and application control
- DCS438: Offering quick wheel changes and both forward and reverse capability, this tool is delivers optimized performance depending on the application
- DCW210: Low-profile height allows user to get close to work surface for precise sanding
DEWALT 20V MAX XR Brushless Cordless 1/2 Inch Hammer Drill Kit
Shop DEWALT 20V MAX XR Brushless tools for powerful performance, longer runtime, and durability. Explore drills, impact drivers, saws, and more.
Features
- 50% higher torque than a leading competitor - the industry's highest rated MAX torque cordless 1/2 in. Hammer drill makes large diameter holes in metal, wood, and concrete with 2,100 in-lbs. Of MAX torqueᵒ.
- Our most powerful 20V MAX* 1/2 in. Hammer drill†† - make large diameter holes in wood, metal, and concrete.
- Help maximize control - equipped with the anti-rotation system that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Minimize downtime - make up to 275 holes per charge and complete jobs quickly with a speed of application of only 2.6 seconds.
- Advanced maneuverability - access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill.
- 3-speed high-performance transmission - help optimize runtime and performance with an all metal transmission.
- Illuminate dim areas - brighten your workspace with the pivoting 3-position, push-button LED.
- Strong bit grip - get high bit-retention with the 1/2 in. Ratcheting nitro-carburized metal chuck with carbide inserts.
- Tool Connect Chip ready - track and manage in the Tool Connect system (chip sold separately).
- Simplify Asset Management - Track and manage with the TOOL CONNECT CHIP READY system (chip sold separately) and the Site Manger app.
DEWALT 60V MAX Mixer/Drill with E-Clutch System Kit
- Discover DEWALT Brushless 60V MAX tools built for powerful performance, long runtime, and professional-grade durability on demanding jobs.
- Integrated e-clutch system helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
- Continuous variable speed trigger allows the correct speed to be found.
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 FLEXVOLT battery (6 Ah).**
DEWALT 60V MAX Stud & Joist Drill (Bare Tool) Quick-Change Chuck E-Clutch
Features
- DEWALT anti-rotation E-Clutch System, offers technology capable of detecting the motion of the tool and shuts it down if necessary, in a bind up situation. The red indicator LED illuminates when the E-Clutch System is engaged.
- 7/16 in. Hex Quick-Change chuck for fast and easy bit changes.
- 2-speed settings (0 RPM to 400 RPM/0 RPM to 1320 RPM) to match appropriate speed to the application.
- Quick-shift speed selector allows the user to easily change speeds without having to feather the trigger
- Magnesium gear case reduces weight while maintaining jobsite durability
- Power of corded with the freedom of cordless
- Tool Connect tag ready. Installing a DEWALT tool tag allows for tracking and locating of the drill using the DEWALT Tool Connect app
- 60V MAX Stud and Joist Drill Tool Only Brushless Quick-Change Chuck E-Clutch
- Up to 6-1/4 in. hole saws into wood
Fein 18V ASCM18-4 QMP AS High Torque QuickIN Top Set Cordless Hammer Drill/Driver Kit
Features
- More control with the extendable auxiliary handle.
- Selectable hammer function for drilling in stone and masonry up to 1/2".
- The brushless, high-performance FEIN PowerDrive motor with up to 30% higher efficiency extends the service life.
- High torque up to a maximum of 1,150 in/lb.
- QuickIN solid metal drill chuck with carbide jaws and 1,062 in/lb clamping force.
- Electronic torque setting (15+1).
- Intuitive control panel with dimmable LED for perfect illumination of the work area.
- Comes with a magnetic bit holder and belt clip.
- QuickIn set includes: 1/4" bit holder, 1/2" socket adapter, self reversing tapping attachment, tap collet holder, offset driver, holesaw adapter, QuickIn Plus cutters adapter, angle head and VARIO adapter.
- Drives 3/8 x 15-3/4 in [10 x 400 mm] screws without pre-drilling
Milwaukee M18 FUEL 1 1/8inch SDS Plus Rotary Hammer with ONE KEY (Bare Tool)
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- POWERSTATE™ Brushless Motor delivers maximum power and long motor life
- REDLINK PLUS™ Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging.
- The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ XC battery packs
- 3.6 ft-lbs Impact Energy
- ONE-KEY™ technology allows for tracking, tool security, and inventory management
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
- 3 Mode: Rotary Hammer, Hammer Only, Rotary Only
- 800 RPM
- 4,600 BPM
- Part of the M18™ system, featuring over 200+ solutions
Milwaukee M18 FUEL Mud Mixer with 180 Degree Handle (Bare Tool)
- Power to mix heavy compounds, such as concrete and mortar
- Ultimate speed control: 3 different ways of controlling speed for clean and consistent mixes (8-Speed setting dial, variable speed trigger and a lock on button)
- Up to 15 buckets per charge (5.0 Ah battery and 5 Gallon buckets)
- 180° Adjustable handle with 16 adjustable settings for user to optimize based on preference and comfort
Reviews
There are no reviews yet.