Milwaukee M18 FUEL 3/8inch Mid Torque Impact Wrench with Friction Ring Kit
Features
- Friction ring (hog ring) ensures quick and easy socket changes
- Faster Removal speed provides increased user productivity
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
- Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100
- Works in up to 69kV environments
- 6.0" in length provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening
- Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Compatible with all M18™ batteries & Chargers
JessEm Mast-R-Lift II
Reelcraft 45 Ft. Single Receptacle Spring Retractable Power Cord Reel Steel
Features
- Reinforced steel - the robotically steel base offers maximum strength and consistent quality.
- Heavy duty collector ring - A robust collector ring assures maximum conductivity current flow.
- Long life drive spring - declutching arbor virtually eliminates possibility of spring damage due to reverse winding; only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
- Quality finish and corrosion resistant - individually powder coated components offer the maximum protection from premature corrosion.
DEWALT 20V MAX 6 Tool Combo Kit
Features
- Our Shortest 20V MAX* Hammer Drill** - Access hard to reach areas with a compact design of 6.5 in. (tool head length only) (DCD799).
- High-Performance Brushless Motor - Drive large-diameter screws with 1,825 in-lb. of max torque and 3,250 rpm (DCF850).
- Up To 368 Cuts Per Charge† - Make fast cuts with a powerful brushless motor that delivers up to 5,500 RPM (no-load) (DCS590).
- Fast Cuts - Rapidly saw through various materials with a 1-1/8 in. stroke length (DCS382).
- Versatile Performance - Swap blades and attachments fast and without wrenches with the Quick-Change accessory system (DCS356).
- Help Maximize Control - Equipped with PERFORM & PROTECT control features that engage when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off (DCG405).
Milwaukee M18 FUEL 1/2in HighTorque Impact Wrench & Grease Gun Combo Kit
Features
- Most Power Dense - Best Combination of Power and Size.
- POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-lbs of Nut-Busting Torque w/ M18™ REDLITHIUM™ XC5.0 Battery
- Up to 2" Shorter Length. 7.6" in length provides most access in tight spaces.
- Fastest Removal Speeds. Maximize productivity on the jobsite and in the shop.
- Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
- AUTO-SHUTOFF™ control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
- Mode 1 IPMs: 0 - 1,300; Mode 2 IPMs: 0 - 2,200; Mode 3 IPMs: 0 - 2,400; Mode 4 IPMs: 0 - 2,400
- Mode 1 RPMs: 0 - 700; Mode 2 RPMs: 0 - 1,300; Mode 3 RPMs: 0 - 2,000; Mode 4 RPMs: FWD: 0 - 900, REV: 0 - 2,000 / 0 - 750
- Friction ring (hog ring) ensures quick and easy socket changes
- M18™ REDLITHIUM™ XC5.0 Resistant Battery included provides increased protection against oils, greases, and solvents
Makita 40V Max XGT Brushless Cordless 2-Piece 2.5Ah/4.0Ah Combo Kit
Features
- Our most powerful Hammer Driver-Drill with Makita-built brushless motor delivers 1,590 in.lbs. of Max Torque
- 3-Speed Transmission provides optimal balance of torque and speed with 3 settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM)
- Electronic digital clutch accurately targets desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4 speed settings (0-1,200/ 0-2,100/ 0-3,000/ 0-3,900 RPM & 0-1,900/ 0-3,100/ 0-3,600/ 0-3,900 IPM) provides 2,040 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- BL4040F 4.0Ah High Power Battery features tabless cell technology delivering up to 35% more power* for optimal performance with GPH03
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- 40V max XGT® Lithium-Ion 4.0Ah High Power Battery reaches a full charge in 70 minutes or less
- The XGT® Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- The XGT® Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Only use genuine Makita® Batteries and Chargers
- 3-year limited warranty on tool, battery and charger
- *Compared to BL4040
Milwaukee M18 FUEL 1/2 in High Torque Impact Wrench with Friction Ring Kit
Features
- Most Power Dense - Best Combination of Power and Size
- POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-lbs of Nut-Busting Torque w/ M18™ REDLITHIUM™ XC5.0 Battery
- Up to 2" Shorter Length. 7.6" in length provides most access in tight spaces
- Fastest Removal Speeds. Maximize productivity on the jobsite and in the shop
- Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
- AUTO-SHUTOFF™ control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
- Mode 1 IPMs: 0 - 1,300; Mode 2 IPMs: 0 - 2,200; Mode 3 IPMs: 0 - 2,400; Mode 4 IPMs: 0 - 2,400
- Mode 1 RPMs: 0 - 700; Mode 2 RPMs: 0 - 1,300; Mode 3 RPMs: 0 - 2,000; Mode 4 RPMs: FWD: 0 - 900, REV: 0 - 2,000 / 0 - 750
- Friction ring (hog ring) ensures quick and easy socket changes
- M18™ REDLITHIUM™ XC5.0 Resistant Batteries included provides increased protection against oils, greases, and solvents
Metabo HPT 36V Nailer Strap Tite Positive Placement Kit
Features
- COMFORT: Ergonomic soft grip handle for comfort
- MULTIVOLT TECHNOLOGY : Easily switch between a MultiVolt 36V battery or the MultiVolt AC adapter (sold separately)
- BRUSHLESS MOTOR TECHNOLOGY: Experience longer run time per charge, less maintenance and increased durability
- INCLUDES: 2.5Ah MV Lithium Ion Battery, Fast Charger, Contractor Bag, and Belt Hook
- STRAP-TITE PROBE TIP: Easily set tip of nailer at the hole in the metal connector
- APPLICATIONS: For fastening various types of pre-punched hole metal connectors to wood
- FASTENERS: Accepts 35 degree 1-1/2" and 2-1/2" nails from .131" up to 0.162" in diameter
- POWER: Drives up to 900 nails per charge using MultiVolt 36V 2.5 Ah Li-ion battery
- CORDLESS FREEDOM: Pneumatic power with 36 volt cordless freedom
Milwaukee M12 FUEL 6 Inch Random Orbital Sander Kit, 3/32 Inch
Features
- Fine Finish 3/32” Random Orbit Throw for Clear Coat
- Able to Sand Clear Coat on 5 Doors with a single M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery Pack
- All Day Comfort
- Tool Free Backing Pad Change
- Feathering Trigger For Ultimate Control
- Variable Speed Dial (3,200 – 12,000 RPM)
- Hook and Loop and PSA Backing Pads Included
- Left and Right Vacuum Port
- Universal Vacuum Port Adapter
Milwaukee M18 FUEL 7-1/4 in. Dual Bevel Sliding Compound Miter Saw (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Only 28 lbs with battery
- Dual bevel with stops at 45° and 48°
- Over 600 cuts per charge
- 3-1/2 in. vertical capacity (base against fence)
- 2 x 8 horizontal capacity (lying flat at 90)
- 2-5/8 in. nested crown capacity
- Cam locking miter detent system
- Shadow cut line indicator for quickly lining up cuts
- Integrated top and side carry handles for easy transportation
- Detent override for easily setting miter locations outside of detentes
