Makita 40V Max XGT Brushless Cordless 2-Piece 2.5Ah/4.0Ah Combo Kit
Features
- Our most powerful Hammer Driver-Drill with Makita-built brushless motor delivers 1,590 in.lbs. of Max Torque
- 3-Speed Transmission provides optimal balance of torque and speed with 3 settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM)
- Electronic digital clutch accurately targets desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4 speed settings (0-1,200/ 0-2,100/ 0-3,000/ 0-3,900 RPM & 0-1,900/ 0-3,100/ 0-3,600/ 0-3,900 IPM) provides 2,040 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- BL4040F 4.0Ah High Power Battery features tabless cell technology delivering up to 35% more power* for optimal performance with GPH03
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- 40V max XGT® Lithium-Ion 4.0Ah High Power Battery reaches a full charge in 70 minutes or less
- The XGT® Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- The XGT® Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Only use genuine Makita® Batteries and Chargers
- 3-year limited warranty on tool, battery and charger
- *Compared to BL4040
Milwaukee M18 Cordless Lithium-Ion 2-Tool Combo Kit
DEWALT 12V/20V MAX Brushless 2-Tool Combo Kit
Features
- Lightweight and body suited for a range of applications in confined, difficult-to-access workspaces
- Helps combat damage caused by some oils and solvents with glass-filled nylon housing
- Compact Lithium Ion pack provides up to 33% more capacity than standard 20V MAX* battery packs
- 2 Amp Hour (36 Watt hour) capacity provides extended runtime
Milwaukee M18 FUEL 2 Tool Combo Kit with ONE-KEY
Features
- POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
- POWERSTATE™ Brushless Motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- Drill is only 6.9" in length for access into tight spaces and reduced fatigue
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Fastest Drilling and Driving applications under load
- AUTOSTOP Feature to Protect from over rotation in a bind up for enhanced safety, equipped with a dedicated AUTOSTOP light on foot of tool to indicate a protection event
- Impact is only 4.47" for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- Mechanical Clutch for consistency in driving a wide range of fasteners
- Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
- Up to 3900 RPM for the Impact Driver
DEWALT 20V MAX 2 Tool Combo Kit
Features
- DCD777: High-performance motor that delivers 340 unit watts out (UWO) of power
- DCD777: LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces
- DCG413: 9,000 RPM motor, E-Clutch System, & Kickback Brake
- DCG413: E-Clutch System automatically shuts down the motor when a wheel pinch is detected
FLEX Hammer Drill with Turbo Mode and Quick Eject Impact Driver Combo Kit
Features
- HAMMER DRILL AND IMPACT DRIVER COMBO KIT - Set includes the 24V hammer drill, 24V impact driver, (2) 2.0Ah Stacked Lithium batteries, and a 160W Fast Charger
- THE FLEX STACKED LITHIUM ADVANTAGE - 200% more power with 24V Stacked Lithium, 300% longer battery life with THERMA-TECH™+ heat management, 100% faster charging, 100% cross-compatible with all FLEX 24V tools and chargers
- SENSOR-FREE BRUSHLESS MOTOR - Every FLEX 24V tool is built around an intelligent digital brushless motor designed to eliminate friction and optimized for higher efficiency and power
- FX1271T - 1/2" 2-SPEED HAMMER DRILL WITH TURBO MODE - Up to 1,400 inch-pounds of torque, up to 2,500 RPM, and up to 40,000 IPM
- FX1371A - 1/4" QUICK EJECT HEX IMPACT DRIVER WITH MULTI-MODE - Up to 2,500 inch-pounds of torque, up to 4,000 RPM, Quick Eject Collet, and Multi-Mode Control
- FLEX 24V CROSS-COMPATIBILITY - Compatible with all FLEX 24V batteries, chargers, and tools.
- FLEX 5-YEAR LIMITED WARRANTY - Register your new FLEX tool, battery, or charger within 30 days of purchase to receive a 5-year limited warranty; 3-year limited warranty without registration
Milwaukee M18 FUEL 2 Tool Combo Kit
Features
- Most Powerful Hammer Drill
- Only 6.9" in length for access into tight spaces and reduced fatigue
- Auto-Stop™ Control Mode, Enhanced Safety
- Fastest Drilling and Driving applications under load
- 50% quieter than a standard impact driver
- Smoother driving and 3X less vibration than a standard impact driver
- Up to 3X faster application speed than the previous generation
- FLUID-DRIVE™ Hydraulic Powertrain reduces metal on metal contact within the tool for quieter operation and a smoother driving experience
- Includes: (1) M18 FUEL 1/2" Hammer Drill (2904-20), (1) M18 FUEL SURGE 1/4" Hydraulic Driver (2761-20), (2) M18 REDLITHIUM XC5.0 Battery Packs, (1) M18 & M12 Multi-Voltage Charger, (1) Side Handle, (2) Belt Clip, (1) Carrying Case
- Compatible with all M18™ batteries
DEWALT 20V Max 9 Tool Combo Kit with Soft Case
Features
- DCD771 20-volt max Lithium ion 1/2-in compact drill driver delivers 300 unit watts out (UWO) of power ability to complete a wide range of applications
- DCF885 20-volt max Lithium ion 1/4-in impact driver features 3 LED lights with 20 second delay to provide visibility without shadows
- DCS381 20-volt max Lithium ion reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
- DCS393 20-volt MAX lithium ion circular saw with 6-1/2-in carbide blade can cut a 2 x 4 at a 45 degree angle in a single pass
- DCS355 20-volt max Lithium ion oscillating tool Quick-Change accessory system allows blades and attachments to be changed quickly without wrenches
- DCL040 20-volt MAX lithium ion LED work light delivers 110 lm of light output
- DCG412 20-volt max Lithium ion 4-1/2-in grinder 7,000 RPM motor provides high power for cutting and grinding applications
- DCR006 20-volt max Bluetooth jobsite speaker allows you to stream music wirelessly from your smart phone or tablet
- DCD740 20-volt MAX lithium ion 3/8-in right angle drill provides dual speed ranges (0-650/0 to 2000 RPM) for increased user flexibility for a wide range of applications
Milwaukee M18 4-Piece Combo Kit
Features
- Part of the M18™ System, Featuring 200+ Cordless Solutions
- Includes: (1) contractor bag. (1) M18 compact 1/2 in. hammer drill/driver (2607-20), (1) M18 HACKZALL recip saw (2625-20), (1) M18 1/4 in. hex impact driver (2656-20), (1) M18 LED work light (2735-20), (2) M18 REDLITHIUM 3.0Ah XC extended capacity battery, (48-11-1828), (1) M18 and M12 multi-voltage charger (48-59-1812), (1) thin kerf blade
- All-metal gear case and chuck: provide maximum impact and shock durability
- Compact design: allows greater accessibility in tight work spaces
- M18 1/4 hex impact driver handles up to 1,400 in-lbs of torque
- Work light features retractable hook for hands-free area illumination
- 5-year warranty on the toolset; 3-year warranty on REDLITHIUM Batteries
DEWALT 20V MAX 1 Inch PEX Expander and 20V MAX Plastic Tubing Cutter (Bare Tool) Bundle
Features
- DCE400B: Expands 3/8 In. - 1 In. Pex Type-A tubing. Automatic rotating head action for even expansion. Full trigger actuation for use in tight spaces
- DCE180B: Help Optimize Control - Maintain control during tough jobs with automatic and manual cutting modes. Onboard LED - Illuminate low-light work areas with the integrated automatic-LED. Fast, Versatile Performance - Cuts 2 In. schedule 80 PVC in up to 3 seconds†
- DCE400B: Bright LED work light to help illuminate dark areas. Dual-sided hang and belt hooks for convenient storage. Rubber overmold for comfortable, ergonomic grip. Uses DEWALT® PEX Heads. Compatible with Milwaukee® and Uponor® Heads
- DCE180B: Built For Productivity - Makes up to 400 cuts per charge and cuts up to 3 times faster†† to help optimize productivity. Clean Cutting - Achieve clean, burr-free cuts. Durable Engineering - Take on harsh jobsite conditions with a stainless steel blade that is corrosion/rust resistant. Balanced Grip - Work precisely with a D-handle style grip that provides a balanced grip. Integrated Anchor Points - Fasten this tool to a workbench top with anchor points on the housing. TOOL CONNECT™ CHIP READY™ - Featuring TOOL CONNECT™ CHIP READY™ functionality (DEWALT® Chip DCE042 sold separately) when paired with the DEWALT® Chip to the DEWALT Site Manager™ app, providing data on asset management and tool location
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
Makita 40V max XGT Combo Kit 2pc
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- 40V max XGT® Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Only use genuine Makita® Batteries and Chargers
- 3-year limited warranty on tool, battery and charger
Milwaukee M18 FUEL 1/2in HighTorque Impact Wrench & Grease Gun Combo Kit
Features
- Most Power Dense - Best Combination of Power and Size.
- POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-lbs of Nut-Busting Torque w/ M18™ REDLITHIUM™ XC5.0 Battery
- Up to 2" Shorter Length. 7.6" in length provides most access in tight spaces.
- Fastest Removal Speeds. Maximize productivity on the jobsite and in the shop.
- Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
- AUTO-SHUTOFF™ control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
- Mode 1 IPMs: 0 - 1,300; Mode 2 IPMs: 0 - 2,200; Mode 3 IPMs: 0 - 2,400; Mode 4 IPMs: 0 - 2,400
- Mode 1 RPMs: 0 - 700; Mode 2 RPMs: 0 - 1,300; Mode 3 RPMs: 0 - 2,000; Mode 4 RPMs: FWD: 0 - 900, REV: 0 - 2,000 / 0 - 750
- Friction ring (hog ring) ensures quick and easy socket changes
- M18™ REDLITHIUM™ XC5.0 Resistant Battery included provides increased protection against oils, greases, and solvents
