Makita 18V LXT Cordless 21 Degree Full Round Head 3-1/2 Inch Framing Nailer (Bare Tool)
$399.00
Features
- Rear lock-and-load magazine with 41 nail capacity for maximum efficiency.
- Weighs only 11.9 lbs. with 18V LXT® battery (battery not included) for reduced operator fatigue.
- Anti-dry fire mechanism engineered to help prevent driving blanks.
- “Tool-less” depth adjustment engineered for more precise flush and countersink nailing.
- Anti-slip nose for controlled nailing at an angle.
- 2-mode selector switch allows operator to select sequential nailing or bump fire options.
- Drives up to 1,000 framing nails on a single charge (battery and charger sold separately).
- Drives full-round head nails into dense engineered lumber with power and ease.
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Belt Hook with retractable extra-wide tool hook secures the tool when not in use.
- Ergonomically designed handle with rubberized soft grip provides increased comfort.
- Drives 21º plastic collated framing nails from 2″ to 3-1/2″ in length and .113 to .148 in diameter.
- Only use genuine Makita batteries and chargers.
Makita 18V LXT Cordless 21 Degree Full Round Head 3-1/2 Inch Framing Nailer (Bare Tool)
The Makita 18V LXT® 21° Full Round Head 3 1/2″ Framing Nailer (XNB03) drives full-round head nails into dense engineered lumber with the power of a pneumatic nailer. The XNB03 can drive up to 1,000 framing nails on a single charge of a 18V LXT® 6.0Ah battery (battery and charger sold separately). The 21° Full Round Head 3 1/2″ Framing Nailer features a two-mode selector switch that allows the operator to select sequential nailing or bump fire options. Its anti-slip nose allows for controlled nailing at almost any angle. The Framing Nailer also features a “tool-less” depth adjustment engineered for more precise flush and countersink nailing. The XNB03 is equipped with an anti-dry fire mechanism engineered to help prevent driving blanks, and the Nailer features a rear lock-and-load magazine with 41 nail capacity for maximum efficiency. An accessory for the Nailer is the Extended Capacity Magazine Set (1914P1-6, sold separately) that holds 97 nails for more user productivity. The Framing Nailer drives 21º plastic collated framing nails from 2″ to 3-1/2″ in length and .113 to .148 in diameter. It weighs only 11.9 lbs. with an 18V LXT® battery (battery not included) for reduced operator fatigue. Convenience features include a built-in L.E.D. light that illuminates the work area, a belt hook with a retractable extra-wide tool hook that secures the tool when not in use, and an ergonomically designed handle with a rubberized soft grip that provides increased user comfort.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bosch 12V Max EC Flexiclick 5 In 1 Drill/Driver System Kit Factory Reconditioned
- Discover the Bosch 12V Max Impact Driver featuring compact design, powerful torque, and cordless convenience for professional and DIY fastening tasks.
Features
- Flexiclick® 5-in-1 design – delivers outstanding versatility in a compact, high-quality drill/driver
- Keyless chuck attachment – provides locked-in drilling for difficult materials
- Locking bit holder attachment – locks hex bits for high-torque driving
- EC Brushless motor – delivers longer runtime with 300 In.-Lbs. of torque and a max speed of 1,750 rpm
- Right-angle attachment – designed for tight work spaces; works with other three adapters and rotates to 16 positions without removing from tool
- Offset-angle attachment – offers precise screwdriving very close to edges; rotates to 16 positions without removing from tool
- Magnetic bit holder – provides the shortest head length for basic driving without an attachment
- Bosch 12V Max EC Brushless Flexiclick 5 In 1 Drill/Driver System Kit Factory Reconditioned
- Compact design – weighs only 1.2 Lbs. (tool only, not including battery) with a very short head length
- Two-speed transmission – provides a high-power setting at 0-460 rpm and a high-speed setting at 1,750 rpm
DEWALT 20V MAX Brushless Site Ready 7-Tool Combo Kit
Features
- DCD798: Over 1 in. shorter in length** at 6.93 in. (tool head length only) to tackle tough jobs
- DCF787: Variable speed trigger allows for control and precision on delicate work surfaces
- DCS565: Quickly adjust the bevel capacity from 0 - 50° with the tool-free bevel lever
- DCS382: 1-1/8 in. stroke length quickly cuts through a variety of materials
- DCS356: The 3-speed selector allows users to choose their speed setting based on application; Dual-Grip variable-speed trigger gives users ultimate speed and application control
- DCS438: Offering quick wheel changes and both forward and reverse capability, this tool is delivers optimized performance depending on the application
- DCW210: Low-profile height allows user to get close to work surface for precise sanding
DEWALT 20V MAX XR 2-Tool Combo Kit with POWERPACK Batteries
Features
- DCD806: Our Most Powerful 20V MAX* 2-Speed Hammer Drill** - Complete a wide range of applications with this hammer drill that is up to 109% more powerful†.
- DCF845: Complete tough fastening applications on the jobsite with 30% more torque**
- DCD806: Professional Performance - Complete jobs with top level speed, control, and precision with a high-speed transmission and variable speed trigger featuring 2 settings (no load 0-650/0-2,000 rpm).
- DCF845: Brushless motor delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws
DEWALT 60V MAX Stud & Joist Drill (Bare Tool) Quick-Change Chuck E-Clutch
Features
- DEWALT anti-rotation E-Clutch System, offers technology capable of detecting the motion of the tool and shuts it down if necessary, in a bind up situation. The red indicator LED illuminates when the E-Clutch System is engaged.
- 7/16 in. Hex Quick-Change chuck for fast and easy bit changes.
- 2-speed settings (0 RPM to 400 RPM/0 RPM to 1320 RPM) to match appropriate speed to the application.
- Quick-shift speed selector allows the user to easily change speeds without having to feather the trigger
- Magnesium gear case reduces weight while maintaining jobsite durability
- Power of corded with the freedom of cordless
- Tool Connect tag ready. Installing a DEWALT tool tag allows for tracking and locating of the drill using the DEWALT Tool Connect app
- 60V MAX Stud and Joist Drill Tool Only Brushless Quick-Change Chuck E-Clutch
- Up to 6-1/4 in. hole saws into wood
DEWALT DEWALT 20V MAX Compact Brushless Drill/Driver Kit
Shop DeWalt 20 V tools for drilling, cutting, fastening, and more. Explore durable cordless power tools with long battery life and professional performance.
- DEWALT brushless motor delivers more run time over brushed
- Compact (7.6 in. front to back), lightweight design fits into tight areas
- Ergonomic comfort grip handle provides ideal balance and tool control
- LED light with 20-second trigger release delay provides increased visibility in dimly lit spaces
Milwaukee M12 FUEL SURGE 1/4 in. Hex Hydraulic Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- FLUID-DRIVE™ hydraulic powertrain reduces metal on metal contact within the tool, delivering quieter operation, smoother performance and increased durability over a standard impact
- Longer sustained torque delivers similar drive times in application as most 12V impact drivers
- Up to 2X quieter operation makes this tool ideal for occupied spaces
- Compact head length and compact battery footprint gives more access than competitive impact drivers
- POWERSTATE™ brushless motor delivers maximum power and long motor life
- REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating
- REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
Milwaukee M18 FUEL Mud Mixer with 180 Degree Handle (Bare Tool)
- Power to mix heavy compounds, such as concrete and mortar
- Ultimate speed control: 3 different ways of controlling speed for clean and consistent mixes (8-Speed setting dial, variable speed trigger and a lock on button)
- Up to 15 buckets per charge (5.0 Ah battery and 5 Gallon buckets)
- 180° Adjustable handle with 16 adjustable settings for user to optimize based on preference and comfort
Reviews
There are no reviews yet.