Milwaukee M12 23 Gauge Pin Nailer (Bare Tool)
$249.00
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Double-Action Trigger for Sequential Driving
- No Pneumatic Hose or Gas Cartridge
- Compatible with 1/2″ to 1-3/8″ 23 Gauge Headless Pin Nails
- Up to 750 Pin Nails Per Charge
- Tool Free Drive Depth Adjustment
- (2) Interchangeable, Non-Marring, Precision Point Tips Included
- Magazine Reload Indicator and Dry Fire Lockout Mechanism
- LED Light for increased visibility
- Fits all M12™ Batteries
Milwaukee M12 23 Gauge Pin Nailer (Bare Tool)
The MILWAUKEE® M12™ 23 Gauge Pin Nailer is the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23-gauge headless pin nails ranging in length from 1/2” to 1-3/8” and features all-day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack (sold separately). This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 3-year limited power tool warranty.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DEWALT 20V MAX 6 Tool Combo Kit
Features
- Our Shortest 20V MAX* Hammer Drill** - Access hard to reach areas with a compact design of 6.5 in. (tool head length only) (DCD799).
- High-Performance Brushless Motor - Drive large-diameter screws with 1,825 in-lb. of max torque and 3,250 rpm (DCF850).
- Up To 368 Cuts Per Charge† - Make fast cuts with a powerful brushless motor that delivers up to 5,500 RPM (no-load) (DCS590).
- Fast Cuts - Rapidly saw through various materials with a 1-1/8 in. stroke length (DCS382).
- Versatile Performance - Swap blades and attachments fast and without wrenches with the Quick-Change accessory system (DCS356).
- Help Maximize Control - Equipped with PERFORM & PROTECT control features that engage when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off (DCG405).
DEWALT 20V MAX Brushless 3 Tool Combo Kit
Features
- DCD777: 1/2-in Drill/Driver is only 7.52-in front to back and has a compact design to fit into tight spaces
- DCF787: 1/4-in impact driver is lightweight at only 2-lbs
- DCS356: Dual-Grip variable speed trigger gives users increased speed and application control
- DCS356 has a bright LED to illuminate dark work surfaces
DEWALT 20V MAX XR 3-Tool Woodworking 5.0Ah Combo Kit
Features
- DCW600: Variable-speed dial allows the user to match the speed of the router to the application
- DCW210: Brushless motor provides runtime and efficiency to get the job done
- DCS334: Brushless motor delivers efficient performance for longer runtime (vs. DCS331 Jig Saw)
- DCB205: XR Lithium Ion pack provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200)
Makita 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver (Bare Tool)
Features
- “Bare Tools” are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you don’t already have the required battery and charger, you must purchase them separately.
- Makita-built brushless motor delivers 3,600 Max RPM and 1,590 in.lbs. of Max Torque
- Rear handle positioned 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- L.E.D. light ring provides superior 360° illumination helps eliminate shadows and illuminate a larger area
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins
Milwaukee M12 FUEL Installation Drill/Driver Kit
- 4-in-1 Dedicated solutions
- Unrivaled access and control
- Up to 300 in-lbs of max torque
- Offset attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening
- Right angle attachment provides efficient fastening and/or drilling at 90 degrees for unrivaled access in tight spaces
- All metal 3/8 in. chuck and 1/4 in. hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling & fastening applications
- Magnetic bit holder holds multiple bits on board to save time when switching accessories
- 5.12 in. wide and only 2.0 lbs with battery attached
- Inline grip allows for maximum tool control and easier access to hard to reach places
- Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface
- 1/4 in. hex, 3/8 in. chuck, and offset attachments connect to right angle attachment for added versatility when drilling and fastening at a right angle
- POWERSTATE™ Brushless motor delivers 300 in-lbs of max torque
- Attachments connect in 16 different positions for access at almost every angle
Milwaukee M18 FUEL 1/4inch Hex Impact Driver Kit
- POWERSTATE™ Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Tri-LED Lighting for maximum workspace visibility
- Compact Size (4.47") for access in tight spaces
- 4-Mode Drive Control
- 2000 in-lbs of torque
- 3900 RPM
- Single Handed Bit Insertion for Ease of Use
- 3.8lbs (with battery)
- All-metal belt clip for portability
- Compatible with all M18™ batteries & chargers
- Most Powerful
Milwaukee M18 FUEL Mud Mixer with 180 Degree Handle (Bare Tool)
- Power to mix heavy compounds, such as concrete and mortar
- Ultimate speed control: 3 different ways of controlling speed for clean and consistent mixes (8-Speed setting dial, variable speed trigger and a lock on button)
- Up to 15 buckets per charge (5.0 Ah battery and 5 Gallon buckets)
- 180° Adjustable handle with 16 adjustable settings for user to optimize based on preference and comfort
Milwaukee MX FUEL Handheld Core Drill Kit with Stand
Features
- Safer handheld coringThe power to core 6 in. holes in reinforced concrete
- Fully compatible with the MX FUEL™ equipment system
- Patented clutch design
- AUTOSTOP™ technology
- Low speed: 790 RPM/ high speed: 1550 RPM
- Push button activation
- Onboard LED level
- Onboard LED performance gauge
- Wet/dry coring
- ONE-KEY™ compatible
- 2 Year warranty
Reviews
There are no reviews yet.